For today’s project, I wanted share a tutorial anyone could do. I tested out my theory that I could create a ruffled tote bag with absolutely no sewing. And guess what- it totally works! The bag is made with a pre made, plain tote bag, a bit of ribbon, fabric strips, pinking shears and hot glue! (You can find these fabric strips everywhere now, and most of the time they come already cut with the “pinked” or “no-fray” edge. )
Can I just say this bag is his bag is awesome? Turned out so cute and is perfect as a book bag or overnight bag (For all the seamstresses out there, you can totally sew this project and I’ll include some additional instructions at the bottom of the post.) (See *A)
I originally bought this fabric to make a quilt for my daughter, but I wasn’t “in love” with it. (I have already bought more fabric for her quilt.) I thought the pinks, greens and yellows in this collection were perfect for a spring tote. Walmart and Amazon are now selling some pretty darn cute fat quarter and jelly roll bundles. Even though a fat quarter is only 22 inches wide, you can use them for this project. I will show you how at the bottom of the tutorial. (See *B)
Make your own No Sew Ruffled Tote Bag:
(Remember, to see any photo larger, left click and open it in a new tab.)
-About 1/2 yard of fabric (You can do just one fabric or mix several different colors and patterns, you will need more fabric for a larger tote.)
-Ribbon (at least 1/2 inch would be best)
-Fabric marker or chalk
-Hot glue gun and lots of hot glue
First of all, my tote bag measures 13.5 inches wide by about 13 inches tall. So if your bag is similar in size, then no math for you, just use my measurements!
To get the width of your strips, measure the width of the bag, add 1/2 inch and multiply by 2.
To figure out how tall your fabric strips need to be, measure the height your bag, and decide how far up the bag you want the ruffled fabric to go. Take that measurement and divide by how many ruffles you want.
Add 1 inch to that number and that is how tall your fabric strips should be. Here are my measurements as an example:
2. Fold over the short edges of each ruffle strip, 1/4 inch. Press firmly with an iron to get a good crease.
3. Next, from the bottom of your tote bag, measure up the height of your fabric strip minus 1/2 inch. Do this in several spots along the bottom and then draw a straight line across. Then, from that line, measure up your fabric strip height minus one inch and draw another line. Keep repeating this for the number or ruffles you have. See my picture below for a better explanation.
|(Ignore my folded up bottom and please excuse the poor quality photo, it was very late…)|
The next step is to “hem” the fabric strip edges. We will use hot glue. I must give this warning… Hot glue is very hot, please be careful! These would be a perfect protective tool to use while working with hot glue.
4. Open the folded edge of your fabric strip and add a small line of hot glue, then fold the fabric back over and press.
Do this on all of your fabric strips.
5. Grab your fabric strips and fold into fourths. Make a mark with your fabric marker on each fold. This will divide your fabric in to four equal sections and will help you distribute the ruffles evenly. Do the same thing with the tote bag.
|See how the blue marks divide the bag into 4 equal measurements?|
6. Starting at the bottom of the bag, add a 1 inch line of hot glue along the line you drew on the tote bag. Quickly line up the edge of your fabric strip, place it in the hot glue. Using your fingers, slide the fabric backwards to make a ruffle. (Remember, the glue is very hot. You have a very small window of time from when the glue is cool enough to work with, but not so cool that it is starting to harden.)
Keep going until all your ruffles are glued on. Go back and add more glue to any loose areas.
Don’t be afraid to practice your ruffling first. I practiced on paper and scraps from an old t-shirt:
7. Next we will add the ribbon trim. Cut a piece of ribbon to the length of your bag plus 1/2 an inch. Use a lighter to heat seal your cut ribbon edges. Fold over one of the ends of the ribbon 1/4 inch, add a drop of glue and squeeze with your fingers; like this:
8. Starting with the edge of ribbon you folded over, add hot glue to the back of the ribbon and attach it along the top edge of your top ruffle, concealing the glued ruffle part of the fabric.
9. Add a spot of glue to any extra ribbon and fold over to make a smooth hemmed edge, then add a little more glue and secure to the bag.
|Yuck! I hate it when my camera focuses on the wrong subject. Bad camera!|
You are done!
I added another color of smaller ribbon and a fabric flower for a little pop! (You can find the fabric flower tutorial here.)
*A. Sewing instructions: After you cut your fabric, fold over the short edges of each ruffle strip, 1/4 inch. Press firmly with an iron to get a good crease. Sew along the pressed edge, 1/8 inch from the edge. Do this on all of the short edges.
Follow the ruffling tutorial found here to ruffle your fabric strips. Pin your ruffles to the bag and sew right over the ruffling stitch. Do this for all of your ruffles.
*B: Using fat quarters: Cut enough fabric so when you line up the fat quarters, they will equal the fabric strip width you figured earlier PLUS 1/2 inch. Fold, iron and glue all the short edges to make a nice side hem on all the fabric strips.
Divide the fabric in to 4 equal parts and mark like we did in step 5. (Pin the two fabric end pieces together if that helps.)
Start attaching your ruffles. When you get to the end of one fabric piece, just start with the other and finish the ruffle. You can barely tell where one piece ends and the other begins.
If you make one of these totes, be sure to tag me on facebook or instagram!
And just to prove it is not all cupcakes and roses all the time over here. That face, oh my…
Don’t miss any more posts! You can follow along on Feedly, Bloglovin’, via blogger using the Google Friend Connect widget, your favorite feed reader, or by signing up via email. Just click on one of the icons below: