Let’s get started!
Download the pattern.
Receive the pattern download link by email when you complete the form below.
Download link expires in 120 hours or 5 download attempts. By entering your email address you are agreeing to the terms and conditions for the use of this pattern and are automatically signed up to receive my weekly newsletter. (You are welcome to unsubscribe from the newsletter at any time, but you will miss out on new free pattern releases and updates to previously released patterns)
Troubleshooting the pattern download:
1. Can’t even get that form to accept your email? If you are on a mobile device (phone, safari, etc) you might have trouble submitting the form. Try from a regular laptop or desktop.
2. You must check off that you accept the terms and conditions or the form will not submit
3. After successful submission of the form, you will be redirected to a thank you page. If that did not happen, then the form did not submit. (The submit button does not always work with all mobile devices/tablets.)
4. If you were successfully redirected to the thank you page and an hour has passed, but there is still no email, please check your spam box. The “from” name is WordPress. (I’m trying to fix this to say Jamie or scattered thoughts of a crafty mom) and the subject line is “your free download link.”
5. Still no email? You can put your information into the form again and if that still doesn’t work, contact me and we will troubleshoot it together.
Free Flutter Sleeve Sewing Pattern, sz 3 to 10
To make this t-shirt you need:
- Up to 1 yard stretch knit fabric
- Ribbed binding (usually has 50 to 70% stretch) or other stretchy knit for neckline (you don’t want to use anything with less than 30% stretch-see notes under pattern tips and tricks)
- Ball point/jersey needle
- spray starch/iron
- basic sewing supplies
- Enter your name and email to download the pattern. Save it to your PC, open the pdf document in adobe acrobat. Don’t print from google’s online version of adobe. (It will sometimes cause the pattern to print to small.)
- Seam allowance is 3/8 inch with a 1/2 inch bottom and sleeve hem.
- The pattern for the neck binding is designed for a ribbed knit with 50 to 75% stretch with good recovery (Fabric Fairy has a lot of good quality ribbed knit choices.) If using a binding fabric with less stretch, you have two choices: 1. Measure the neckline and cut a fabric strip 15% less than the measurement (multiply the neck measurement by .85) and follow the instructions in step 4. (This is the “in the round” method– and it never hurts to do the finger stretch test before sewing…) 2nd choice: The “flat” method– Sew only one shoulder closed, fold binding in half and attach the binding from one end of the neckline to the other. Trim excess binding and sew the other shoulder closed. (The only downside to this method is the seam will be on the side and slightly bulkier.) (Similar to what is done in this tutorial.)
- Use a ballpoint/stretch needle
- Sew seams with either a serger, stretch stitch, narrow zig zag or a straight stitch with a longer stitch length and a slightly loosened tension. (Make a couple of practice stitches on your fabric to see what works best.) I also like to use this “lightning bolt” stretch stitch on seams that need strength but a little give. (For my project I used a combination of straight stitch and serger for seams and zig zag on the hems.)
- Use spray starch when pressing hems. Sew hems with a zig zag, twin ball point needle, narrow zig zag with a long stitch length or a straight stitch with a long stitch length and a slightly loosened tension or leave raw. (also helps to use a walking foot.)
- If you find your fabric keeps getting pulled inside the needle plate, place a small piece of tissue underneath the fabric so the feed dogs have something to grip.
- Size 3: Height- 38.5 inches, Weight- 32 lbs, Finished length: 16 Finished chest: 23.125 inches
- Size 4: Height- 41.5 inches, Weight- 36 lbs, Finished length: 16.85. Finished chest: 23.75
- Size 5: Height- 44.5 inches, Weight- 42 lbs, Finished length: 17.75. Finished chest: 24.375
- Size 6: Height- 46.5 inches, Weight- 48 lbs, Finished length: 18.25. Finished chest: 25.75
- Size 7: Height- 51 inches, Weight- 60 lbs, Finished length: 19. Finished chest: 27.25
- Size 8: Height- 53 inches, Weight- 66 lbs, Finished length: 19.75. Finished chest: 28.5
- Size 10: Height- 55 inches, Weight- 74 lbs, Finished length: 20.75. Finished chest: 29.5
Products used and recommended in this post:
- My favorite fabric shop for knits: Funkalicious Fabrics, Fabric.com and Girl Charlee.
- My Sewing Machine: SINGER 9960 Quantum Stylist, my coverstitch: Janome Cover Pro 1000cpx
- My Serger: Brother 1034D 3 or 4 Thread Serger or you can just use Pinking Shears
- Rotary Cutter
- I love my large ruler and large cutting mat, but you may prefer to start of with a smaller Cutting set
- Dritz Dual Purpose Marking Pen and Fray Check
- Ball Point needles
- Singer walking foot or universal walking foot
- Wonder clips (I didn’t use these in the post, but they are just awesome!
Sewing instructions for Free Flutter Sleeve T-Shirt Pattern
Step 1: Print and Assemble pattern, cut out pattern pieces.
Save pattern to your desktop, open in the free adobe reader. Set to print actual size and print pattern. Cut out each block around the outer gray edge and align the gray boxes, edge to edge (don’t overlap) matching up colored circles. Tape pattern together and cut out size needed. (You can print the bodice twice- one for the front and one for the back or print once and use a tracing wheel and paper.)
Please note: There is an error in the pattern!
I accidentally left the binding piece off the pattern and I’m in the process of correcting this error.
In the meantime, after you have sewn the shoulders together, measure around the entire neckline and multiply that measurement by .85 . Cut a strip of fabric, your measurement by 1.5 inches.
(You can also use the binding from the basic t-shirt pattern, as the necklines are the same)
Step 2: Cut pattern pieces from fabric.
Fold fabric so the stretch is running side to side and the selvages meet in the middle. Line bodice up on folds and sleeves as shown. (Image below shows a size 10 on 56 inch wide fabric.)
Cut out a front and back bodice, 2 sleeves and neck binding.
If you are using ribbed binding or fabric with 50% stretch cut out neck binding from pattern. Using fabric with less stretch: you’ll want to measure the neckline and cut a strip that is about 15 % shorter than the neckline.
Step 3: Assemble shirt.
Right sides together, line up front and back bodice. Sew together at shoulders, using a 3/8 inch seam allowance. (Don’t forget- if you decide to use the “flat method” (see binding tips above) only sew one shoulder closed.)
Step 4: Attaching neck binding.
Fold binding in half (as shown) press.
(“In the round” method”) Unfold binding, sew with a 3/8 inch seam allowance and trim excess seam.
Refold binding and divide into 4 equal sections. Mark t-shirt neckline into 4 equal sections.
(Please note: I adjusted the depth of the back neckline, so your side pins may be closer to the shoulder seams.)
Line up the quarter marks as shown:
Attach the binding to the neckline with a 3/8 inch seam allowance. Stretch the binding fabric as you sew. Take care to not let the neckline fabric stretch. (Go slow and know this my take practice.)
For a more finished look, you can topstitch along the edge of the neckline.
Step 5: Attaching sleeves.
Fold the edge of the sleeve over 1/2 inch and sew with a zig zag or other stretch stitch. (Using spray starch will help stabilize the hem for easier sewing/hemming.)
Repeat for other sleeve.
Right sides together, line up top of sleeve with shoulder seam. Sew using a 3/8 inch seam allowance.
Repeat with other sleeve.
Step 6: Side seams and hem.
Sew along sleeve and down side of shirt. Repeat on other side.
Hem bottom of tee, by folding up 1/2 inch and sew with a zig zag or other stretch stitch.
That’s it you’re done- now go take some pictures!
You might also like:
Don't miss any more posts! You can follow along on Feedly, Bloglovin', your favorite feed reader, or by signing up via email. Just click on one of the icons below: