I've got a new Shirred Halter Sundress tutorial to share today! (Includes measurements for sizes 2 to 10.)
I've been trying to straighten up my craft room a little bit. Between me and the kids, it's ridiculous how quickly it becomes trashed! (Doesn't help that I have to pull out 10 different fabrics for each project...) Anyway, while straightening up, I came across this bandanna fabric I'd bought on a whim last year. Originally, I was going to make pillows, but turns out, pillow forms that size are really expensive. (Plus the colors didn't really go with any of our decor,) so I scrapped that idea and decided to make a dress from the fabric.
I think I made the right choice, because this fabric is spectacular! So gorgeous for summer. The shirred top will stretch, and the length is long enough, so it will grow with her for a few more summers.
You can use bandannas on this dress, but regular woven cotton or knit fabrics will work too. A couple of things to keep in mind if you use bandannas: 1. They shrink, so be sure to wash them first. 2. Depending on the bandanna, they can be kind of sheer for a dress. 3. For an older girl, you will be limited on width/length of the dress- though it would make a darling top as well.
Even though I used quilting cotton, I was limited on the width of my dress due to the design of the fabric print. (The final width was 46, I would have liked it to be closer to 50.) The widths given in the tutorial will be the wider widths, but use just use what you have- a few inches don't really matter too much.
How about a secret giveaway? I have 2 panels of this fabric in my stash. I'd like to give it away to one of my readers. Leave a comment stating what you would make with the blue/brown fabric. Be sure to use the words "blue/brown" so I know you are entering the giveaway. For an extra entry, pin the post and leave a 2nd comment stating you pinned it and the pin url. I'll choose a winner around Monday, 8/11.
To make the dress:
Bodice: up to 1/4 yard
Straps: 1/4 yard
Skirt: 3/4 yard for smallest size up to 1 1/2 yard for largest size
- Elastic Thread
- basic sewing supplies
- steam iron
Use a 1/4 inch seam allowance
Refer to this child measurement chart if you need help determining size.
Step 1: Cut the pattern pieces out for your size via this chart.
Step 2: Assembling and shirring bodice.
Line up bodice pieces, right sides together, and sew along on edge, finishing the seam with your preferred method. (Zig zag stitch, serger or pinking shears.)
To hem the top of the bodice, fold the top edge over 1/4 inch, press. Fold over another 1/4 inch, press again and sew along the edge. I chose to do a rolled edge with my serger, so if you do this, go ahead and cut off that extra 1/2 inch.
To shirr the bodice, first you must hand wind the elastic thread around your bobbin. (not too tight, just normal tension.) Then add the bobbin to your machine and thread as normal.) On my Janome and Singer, I did not adjust the stitch lengths or tension at all, but I recommend a few test runs if you have not shirred on your machine before.
To shirr, sew straight lines from one end of the bodice to the other, 3/8 inch apart.
The fabric will begin to bunch up, so be sure to keep it flat as you sew.
Keep going, all the way to the bottom.
Apply steam to the shirring and watch it gather up!
Securely tie off your stitches.
Line up the raw edges of the bodice, right sides together and sew. Finish this seam with your preferred method. I don't recommend the pinking shears in case you cut off the tied off elastic thread.
Line up the 2 skirt pieces, right sides together and sew both sides. Finish these seams
Sew a gathering/basting stitch along the top or the skirt.
Lay the bodice out flat and gather the skirt to the width of the bodice PLUS 1 INCH. (so it is actually 2 inches wider when you open everything up. (The extra width will help keep the stitches from popping when your child takes the dress on and off.)
Divide the bodice up into 4 sections and mark with a pin.
Do the same with the skirt.
Line up the raw edges of the skirt and bodice right sides together, matching up the pins. Finish pining the skirt to the bodice, gently stretching the bodice to fit the gathered skirt.
Sew skirt and bodice together, right below/along the gathering stitch. Finish this seam.
Hem the bottom of the dress by folding the bottom edge 1/4 inch, press. Fold over another 1/4 inch, press again and sew along the edge.
Step 4: Adding the straps:
Fold the straps right sides together and sew along the side and top edge. Flip right side out and press.
Pin the straps in place and carefully stitch in place.
Add an embellishment if desired.
I personally dislike it when the back of my daughter's halter dresses sag! To solve this issue, I always add a little loop to the back of her dresses to tie the halter straps through. This helps support the dress over her shoulders ad prevents the back from sagging.
That's it, you are done!
Like this tutorial? Please pin it! ==>>
Don't miss any more posts! You can follow along on Feedly, Bloglovin', via blogger using the Google Friend Connect widget, your favorite feed reader, or by signing up via email. Just click on one of the icons below: