It may be January, but I finally got to make pajama bottoms for my son. (They were on my to-do list for Christmas, and hey, it’s only a few weeks late…) The pajamas look pretty good and I am super pleased with way the matching screen printed t-shirt came out.
- Fleece (however much you need to get your desired length- I used a yard to get a boy’s 7/8)
- 1 inch wide elastic
- fabric marker or chalk (If needed)
- basic sewing supplies
- loose fitting pajama bottoms to trace
1. Tracing and cutting the pattern.
Fold your fleece in half, selvage to selvage. This way the stretch of the fabric will be going side to side. Turn the pajama bottoms you are tracing inside out and fold in half. Find the crotch seam and pull it out all the way to the back. (You can see what I mean in the photo below.) The shape of fleece pajama bottoms is very forgiving, that’s why they are such a great make-your-own- pattern project to begin with.
Lay the bottoms to trace on the folded fabric, with stretch going side to side. Trace around the fleece, giving yourself a 1/2 inch seam allowance around the sides. Add an extra 3/4 inch at the bottom hem and 1 1/2 inch at the top for the elastic. Cut out the two back pieces. Then flip the pants around and pull the crotch seam out to the front and repeat the tracing cutting process to get 2 front pieces.
Step 2: Assembling the pants:
The fleece is so thick, I have found it easier to use a 1/2 inch seam allowance.
Step 3: Attaching the elastic.
Lately, I have been adding elastic to my knit leggings and fleece pants in a slightly different way. Instead of creating a casing, I’ve been sewing the elastic directly to the fabric. (If you feel more comfortable making a casing, you can still do that, just add another 1/2 inch to the seam allowance around the waist band when cutting.)
Cut the 1 inch elastic to your child’s waist measurement minus 1 inch.
Overlap the ends of the elastic slightly and sew together using two rows of a tight zig zag stitch.
Next, fold the elastic circle in half and mark the half way spot on both sides. Fold the elastic in half the other way and mark those half way points. This will divide the elastic in to 4 equal sections.
Line up these marks with the seams of the pajama bottoms and pin into place, about 1/4 inch down from the fabric edge.
It will look like this:
Line up the pants/elastic under your sewing needle at one of your marks. Lower the needle into the fabric (so it stretches out to the width of the fabric underneath.) Sretch the elastic from the 1st mark to the second mark. Sew along the edge of the stretched elastic, all the way around, using a zig zag or stretch stitch. (Sew along the blue line indicated in the photo below.)
Fold the elastic over to the inside and sew right along the edge of the elastic (but not over the elastic.) You could use your zipper foot or stitch in the ditch foot the help hug the edge of the elastic, though I just used my finger to feel the edge and went slowly…
If you want a more professional looking finish on the inside elastic, you could fold the bottom edge under and sew over that, but since fleece doesn’t fray you can just leave the edge raw like I did…
Here is how the waist bad looks finished:
They also sent me an assortment of inks, but I wanted off white. I custom mixed the shade I wanted using white, brown and yellow fabric paint.
I placed the screen where I wanted it on the shirt and spread the paint with the applicator. That was it! (Helpful hint: make sure you peel of the protective plastic coating on the bottom of the screen, so the paint will transfer to the shirt and not the plastic sheet…
He loved that I let him bounce on the bed to take these pictures!
What do you think, will you give them a try? Let me know if you do!
Don’t miss any more posts! You can follow along on Feedly, Bloglovin’, via blogger using the Google Friend Connect widget, your favorite feed reader, or by signing up via email. Just click on one of the icons below: