- If using a lightweight fabric, consider double lining the cowl, the extra weight will make it hang better
- seam allowance is 1/4 inch.
- My top has a vented uneven hem, I will demonstrate how to get that look
- To figure out your desired length for your top, measure yourself from the top of your bra line (under your arm) to your desired length. Add 3/4 inch to that number for seam allowance and hem.
Products used and Recommended:
- My favorite fabric shop for knits: Funkalicious Fabrics and Girl Charlee. My favorite shop for cottons and other fabrics: Fabric.com.
- My Sewing Machine: SINGER 9960 Quantum Stylist, my coverstitch: Janome Cover Pro 1000cpx
- My Serger: Brother 1034D 3 or 4 Thread Serger or you can just use Pinking Shears
- Rotary Cutter
- Ball Point sewing needles
- I love my large ruler and large cutting mat, but you may prefer to start of with a smaller Cutting set
- Dritz Dual Purpose Marking Pen and Fray Check
- Wonder clips (I didn’t use these in the post, but they are just awesome!
How to Sew a Cowl Neck Top
Return to Photo styling page. (page 1)
- Your favorite Raglan Top Pattern (link to my free pattern here – keep in mind this pattern is designed to have a cuff added to the bottom and sleeves. You’ll definitely want to add 2 inches to the sleeve and maybe the bottom too.)
- 2 yards stretch knit or sweater fabric.
- Basic Sewing supplies
Step one: Adjusting your pattern.
Are you a v-neck kind of girl or do you like more of a crew neck in your tops?
Like a crew neck? Trim 3/4 inch off the top of the pater for the front bodice, back bodice and sleeve.
Prefer a v-neck? Trim 3/4 off the patterns for the sleeve and back bodice and trim as shown below for the front bodice.
Step 2: Cut out bodice and sleeve pattern pieces.
Reminder: When cutting out the sleeve, fold fabric in half and cut 2 pieces at once OR you will need to flip pattern over if cutting seperately. (This way you will cut the sleeves the right direction.)
Step 3: Assemble top.
Line up the sleeves with the front of the bodice, right sides together and sew along the edge of the sleeves.
Line the back bodice up with sleeve edges, right sides together and sew.
Fold sleeve edges over 1/2 inch, press and hem. Use a double needle or zig zag stitch for best results. (You can even do a blind hem if you have a serger – see that tutorial here.)
Line up the sleeves edges and sides of the bodice right sides together. If creating a vented hem, mark the spot where to stop sewing. Sew along edges with a 1/4 inch seam allowance, stopping at your mark and backstitch to secure the seam.
Hem the bottom of the shirt by pressing the hem up 1/2 inch and sew with a double needle or zig zag stitch.
Press the side vents over and stitch with a double needle or zig zag stitch.
Step 4: Measure and cut out cowl.
Measure along your neckline and add .25 inches to that number.
Fold fabric in half selvage to selvage.
Using the neckline measurement, cut out shape as shown below:
Step 5: Attach cowl.
Right sides together, sew the cowl together along the diagonal seam, using a 1/4 inch seam allowance.
Turn the shirt and cowl, right side out. Slip the shirt into the cowl. The smallest side of the cowl is at the top and the seam of the cowl should be lined up with the center back of the bodice.
Sew along the top using a 1/4 inch seam allowance.
When the shirt is draped on the body, this seam should not show.
Hem the bottom of your cowl by folding the bottom over 1/4 inch, pressing and folding another 1/4 inch. I recommend using a wide zig zag or double needle.
Hand tack the back of the cowl in place and you are done!
What do you think? Would you wear a top like this?
As always, if you sew something from one of my tutorials or patterns I would love to see it! Be sure to come back and share a photo on my facebook page or tag me on Instagram @scatteredmom, with #scatteredmompatterns!Don't miss any more posts! Follow along on Feedly, Bloglovin', your favorite feed reader, or signing up via email and have new posts delivered to your email box each week!